How to conduct an energy audit at your house could seem a difficult task if you do not know where to start from. The colder months of winter quickly approach and if you are not preparing your house your utility bill will reflect. Electric audit is a great tool for that assignment.

It is impotent to take control and change the situation, We should get the respite from high utility bills. If you do not know how to audit you should read first the attached guide to get a general overview. Performing a DIY energy audit on your home should be incorporated into your yearly checklist, one of the tasks you should do preparing to winter cold days.

Knowing how to conduct an energy audit is important because there could be hundreds of small places where your home is losing heat. Each one of them is very small. However, when added up, it could significantly increase, and you are losing a lot of heat.

After quick learning how to conduct an energy audit, you can quickly and efficiently identify the areas that need addressed before the snow will come.

How to Conduct an Energy Audit – Step 1

Look for drafts coming from the areas like windows and doors that lead to the outside. A burning incense stick is a great draft locator. It is very useful for hard to find drafts where the smoke will toss and turn under the slightest breeze.

It is time to clean the old wear and re caulk the windows. Windows in bad shape will have to be replaced when ever you will have the money for it. Check also the doors leaks, are they closed tight or have cracks around?

You can find in most hardware stores a selection of inexpensive weather stripping, easy to install, that can help you keep the cold out. Recheck that the doors are sealed with an incense stick.

How to Conduct an Energy Audit – Step 2

Check for drafts around electrical outlets and switches. If the walls around them are not insulated properly there can be some significant heat loss. Changing some of the gaskets and installing them behind the covers can reduce air flow.

How to Conduct an Energy Audit – Step 3

Check the attic hatch and re-insulate it. Heat inside the house is rising and will exit through the open hatch.

How to Conduct an Energy Audit – Step 4

The baseboards are another place to look for air drafts. Look for a small gap between the bottom of the floor and the drywall. The gaps can be filled with caulk.

How to Conduct an Energy Audit – Step 5

Fireplace louvers should function properly, much heat can escape from the house by not having a louvered dryer vent to properly function.

How to Conduct an Energy Audit – Step 6

Around a wall air conditioner, it is another place domed to air leaks. Best things to do are to seal the leaks with caulk.

How to Conduct an  Energy Audit – Step 7

This is the time to move to the outside of the house:

A. Inspect all of the water pipes you have been entering the house, you probably will find holes and gaps around them, they should be caulk.

B. Check the siding and exterior of the windows and apply caulk where needed.

If you want to learn how to conduct an energy audit and make it in a professional way have the guide and your bills will be lower and your home will feel much more comfortable.

Share and Enjoy:
  • Print
  • Digg
  • Sphinn
  • del.icio.us
  • Facebook
  • Mixx
  • Google Bookmarks
  • Blogplay
  • Add to favorites
  • RSS
  • StumbleUpon
  • Twitter
  • Technorati
  • Faves
  • Reddit
  • Slashdot
  • Yahoo! Bookmarks

Related posts:

  1. Professional or DIY Enthusiast – Learn How to Conduct an Energy Audit
  2. Are DIY Solar Power Systems a Scam?
  3. Building Home Alternate Energy – DIY Green Energy Review
  4. Don’t Buy DIY Alternative Energy Source Guides – Installation Is Out Of Your Reach.
  5. How to Build Home Solar Energy System By Yourself

Tagged with:

Filed under: Certified Energy Auditor

Like this post? Subscribe to my RSS feed and get loads more!